4.0 Download, Android Firmware, Android Rom, Android Software, Android Version, Download Android, Download Operating, Firmware, Firmware Download, Firmware Update, Free Firmware, Install Firmware, Latest Android, Latest Firmware, Official Firmware, Other keywords, Phone Firmware, Phone Update, Sansung Update, System Android, System Update, Update Download, Upgrade Android

Download latest Android 4.4 Kitkat stock firmware for Cube U27GT tablet




Download latest Android 4.4 Kitkat stock firmware for Cube U27GT tablet from here or from here. Download previous firmware version from here. Download another Cube firmware from here.


Archive name: U27GT-3G_V1.8_20140904
Archive file size: 374 MB
Project: esky82_tb_cn_kk
Platform: MT6582
Config_version: V1.1.1
Baseband: MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V39_1_wg_n


  Installing the ROM 
1. Run flash tool “the Flash_tool.exe” 
2. Choose “Scatter”  file. 
3. At this point, you need to remove the battery from your device and connect the device to a USB 2.0 port on your PC (USB 3.0 is not supported). You should start hearing the “dings” in Windows to signify that it detects your device. 
4. Click the Download button on the Flash Tool. 
5. If your device is connected properly, you will see the percentage bar change colors and start running. The one to watch is the yellow bar that goes from 0-100% indicating that the ROM is being flashed. 
6. You will then get a window with a green circle, indicating that the flash is complete. 
7. When the flashing process is done, disconnect the USB cable and replace the battery in your device and turn on the device. Your device will then boot into the newly installed ROM.
Previous
Next Post »