4.0 Download, Android Firmware, Android Rom, Android Software, Android Version, Download Android, Download Operating, Firmware, Firmware Download, Firmware Update, Free Firmware, Install Firmware, Latest Android, Latest Firmware, Official Firmware, Other keywords, Phone Firmware, Phone Update, Sansung Update, System Android, System Update, Update Download, Upgrade Android

Download Android 4.4 Kitkat stock firmware for CHUWI VX8 Phablet


Download Android 4.4 Kitkat stock firmware for CHUWI VX8 Phablet from here, here or from here.

Archive name: Chuwi VX8-20140703 Stock Firmware
Archive file size: 422 MB
Config_version: V1.1.2
Platform: MT8127
Project: esky27_tb_ccn_kk


 
Installing the ROM
1. Run flash tool “the Flash_tool.exe”
2. Choose “Scatter”  file.
3. At this point, you need to remove the battery from your device and connect the device to a USB 2.0 port on your PC (USB 3.0 is not supported). You should start hearing the “dings” in Windows to signify that it detects your device.
4. Click the Download button on the Flash Tool.
5. If your device is connected properly, you will see the percentage bar change colors and start running. The one to watch is the yellow bar that goes from 0-100% indicating that the ROM is being flashed.
6. You will then get a window with a green circle, indicating that the flash is complete.
7. When the flashing process is done, disconnect the USB cable and replace the battery in your device and turn on the device. Your device will then boot into the newly installed ROM.



Previous
Next Post »