Firmware details
Archive： HPH_NT-V8_v1.1_by_mo123
Image: HPH_NT-V8_v1.1_by_mo123 / update.img
Archive： HPH_NT-V8_v1.1_by_mo123
Image: HPH_NT-V8_v1.1_by_mo123 / update.img
Model: Nagrace HPH NT-V8 TV Box
Image file size: 907 MB
Platform: Rockchip RK3368
FW version: 5.1.00
Boot version: 2.40
Model number: rk3368-box
Build number: rk3368_box-userdebug 5.1.1 LMY48G eng.yangfeihu.20151222.110700 test-keys
SDK version: RK30_ANDROID5.1.1-SDK-v1.00.00
Changelog
- Universal storage (around 12.5GB)
- 1080p/1440p Youtube, should work better now
- Google Movie support
- MXPlayer with DTS/AC3 Codec
- Streaming addons in Kodi should work better
- 4:3 Aspect ratio videos can now stretch fullscreen non-linear
- Pulsar and other torrent addons working in Kodi
- Audio sync improved
- to root - Go to Accessibility options
Before Installation
- Make sure USB Power saving mode is disabled for the USB Port you use to flash the device
- Use a PC Back USB Port and not ones from the front or a laptop
- Pause Antivirus software for 10 minutes to not interfere with the flashing or cause high disk usage.
- Make sure device was connected to PC before in flash mode and drivers were installed
To Install the drivers
1. If flashing for the first time, you need to install the drivers with DriverInstall.exe
2. If you recently upgraded your operating system to Windows 8.1 or higher, it's also a good idea to install the latest drivers.
3. Let your PC recognize the device and automatically install the drivers
- Connect device with OTG Port and cable to PC
- Now connect the power adapter
- Before plugging the power adapter into the device, hold a paperclip into the reset hole of the device, keep holding it while connecting the power
You will hear a 'click sound' that Windows has now recognized the USB device.
- It will ask to install the drivers or install it automatically.
Flashing the ROM
1. Select 'Upgrade Firmware' in AndroidTool v2.35(Second tab)
2. Click on the 'Firmware' button to load the firmware(update.img that you extracted from the 7zip compressed file)
3. Click 'EraseFlash' to wipe your device, wait for it to finish.
4. Click 'Upgrade' to flash the new firmware.
5. Wait about 2 minutes after flashing and before unplugging device for firmware to settle.
6. Disconnect from PC and connect to TV.
Enjoy
FW version: 5.1.00
Boot version: 2.40
Model number: rk3368-box
Build number: rk3368_box-userdebug 5.1.1 LMY48G eng.yangfeihu.20151222.110700 test-keys
SDK version: RK30_ANDROID5.1.1-SDK-v1.00.00
Changelog
- Universal storage (around 12.5GB)
- 1080p/1440p Youtube, should work better now
- Google Movie support
- MXPlayer with DTS/AC3 Codec
- Streaming addons in Kodi should work better
- 4:3 Aspect ratio videos can now stretch fullscreen non-linear
- Pulsar and other torrent addons working in Kodi
- Audio sync improved
- to root - Go to Accessibility options
Before Installation
- Make sure USB Power saving mode is disabled for the USB Port you use to flash the device
- Use a PC Back USB Port and not ones from the front or a laptop
- Pause Antivirus software for 10 minutes to not interfere with the flashing or cause high disk usage.
- Make sure device was connected to PC before in flash mode and drivers were installed
To Install the drivers
1. If flashing for the first time, you need to install the drivers with DriverInstall.exe
2. If you recently upgraded your operating system to Windows 8.1 or higher, it's also a good idea to install the latest drivers.
3. Let your PC recognize the device and automatically install the drivers
- Connect device with OTG Port and cable to PC
- Now connect the power adapter
- Before plugging the power adapter into the device, hold a paperclip into the reset hole of the device, keep holding it while connecting the power
You will hear a 'click sound' that Windows has now recognized the USB device.
- It will ask to install the drivers or install it automatically.
Flashing the ROM
1. Select 'Upgrade Firmware' in AndroidTool v2.35(Second tab)
2. Click on the 'Firmware' button to load the firmware(update.img that you extracted from the 7zip compressed file)
3. Click 'EraseFlash' to wipe your device, wait for it to finish.
4. Click 'Upgrade' to flash the new firmware.
5. Wait about 2 minutes after flashing and before unplugging device for firmware to settle.
6. Disconnect from PC and connect to TV.
Enjoy
Caution: Please do not update firmware unless you know what you are doing, you really want it or it is absolutely necessary. Firmware updates may occasionally have bad results, like bricking your device, temporarily or permanently. The firmware update process is done entirely at your own risk. Before attempting to update the firmware, back up your data.
Don’t miss any of our future video tutorials, follow us on Youtube. Like us on Facebook. Add us in your circles on Google+. Watch our photo albums on Flickr. Subscribe now to our newsletter.
Sign up here with your email
ConversionConversion EmoticonEmoticon